Tail guidance

The tail guidance is an additional, pleasant detail to bring in the tail into the tail case of the trailer without further handles. This is particularly important with gliders without a tail wheel, since it can occur that the tail finally stands beside the case. That continues not to be bad, but in this case you have to raise the fuselage to bring the tail into the desired position.

For gliders without a tail wheel we recommend additionally a floor plate to protect the trailer soil durably against abrasion. If this metal sheet is long enough to cover the tail case, this GRP construction unit is additionally protected from damages and increased wear.

If you want to put the tail "Goal-safe" into the tail case, you have to install some contriving metal sheets. Those should not be very high and coloured, in order to keep the danger that you stumble when going in the trailer (e.g. with the elevator in the hand) as small as possible.

Tail guidance Here the tail guidance is to be recognized unfortunately only in the beginning. The "floor plate" was installed, but in this case the contriving angles wasn't installed.

Tail guidance Here we will insert still further detail photos at next opportunity.